About The CityDepartmentsCalendarsCity ServicesCity OfficesFAQ'sContact Us
Homepage > ... > Environmental Programs > Storm Water Pollution Prevention > Heavy Equipment & Earth Moving Activities
E-mail storyPrint friendly format
Heavy Equipment & Earth Moving Activities

Heavy Equipment Operation Problems
Soil excavation and grading operations often contribute to urban runoff pollution. By loosening large amounts of soil and sediment, earth-moving activities can cause sediment to flow into gutters, storm drains and the ocean.

Sediment is the most common pollutant washed from worksites, creating multiple problems once it enters the ocean. Sediment clogs the gills of fish, blocks light transmission and increases the ocean water temperature, all of which harm aquatic creatures and disturb the food chain upon which both fish and people depend.

Sediment also carries with it other worksite pollutants such as pesticides, cleaning solvents, cement wash, asphalt and car fluids like motor oil, grease and fuel. Thus, poorly maintained vehicles and heavy equipment leaking fuel and oil on the construction site also contribute to ocean pollution.

Solutions

General Business Practices

  • Schedule excavation and grading work for dry weather.

  • Use as little water as possible for dust control.

Clean Up Spills

  • Never hose down "dirty" pavement or impermeable surfaces where fluids have spilled. Use dry cleanup methods (saw dust, cat litter, and/or rags).

  • Sweep up dry spilled materials immediately. Never attempt to bury them or "wash them away" with water.

  • Clean up spills on dirt areas by digging up and properly disposing of contaminated soil.

  • Report significant spills to the appropriate spill response agencies immediately.

Vehicle & Equipment Maintenance

  • Maintain all vehicles and heavy equipment. Inspect frequently for leaks.

  • Conduct all vehicle/equipment maintenance and refueling at one location - away from storm drains.

  • Perform major maintenance, repair jobs and vehicle/equipment washing off site.

  • Use gravel approaches where truck traffic is frequent to reduce soil compaction and limit the tracking of sediment into streets.

  • Use drip pans or drop cloths to catch drips and spills, if you drain and replace motor oil, radiator coolant or other fluids on site. Collect all used fluids, store in separate containers and recycle whenever possible.

  • Do not use diesel oil to lubricate equipment or parts.

Erosion Prevention

  • After clearing, grading or excavating, exposed soil poses a clear and immediate danger of storm water pollution. Revegetation (permanent or temporary) is an excellent form of erosion control for any site.

  • Avoid excavation and grading activities during wet weather.

  • Construct diversion dikes to channel runoff around the site. Line channels with grass or roughened pavement to reduce runoff velocity.

  • Cover stockpiles and excavated soil with secured tarps or plastic sheeting.

  • Remove existing vegetation only when absolutely necessary. Large projects should be conducted in phases.

  • Consider planting temporary vegetation for erosion control on slopes or where construction is not immediately planned.

  • Plant permanent vegetation as soon as possible, once excavation and grading activities are complete.

            
translation powered by
Google
Top 
Copyright © 2000 - 2014 The City of Hawthorne, CAPowered byCivica Software